Monitor Items - Daikin AKZ9 Series Instruction Manual

PIM00318A_EN.fm Page 23 Tuesday, October 26, 2010 12:37 PM

Monitor Items

When the "Monitor mode" is selected, the following items can be checked.
No.
0 Machine temperature [Th1]
1 Outlet oil temperature or returned oil temperature [Th2]
2 Room temperature [Th3]
3 Inlet oil temperature [Th4]
4 Reserve [Th5]
5 T (Th4–Th2)
6 Capacity command value (%)
7 Compressor inverter rotation speed (rps)
8 Power consumption (kW)
9 Status of expansion DIN (third digit)/DOUT (second digit)
∗1: Nos. 0, 1, 2, and 3 indicate a temperature detected with each thermistor.
When the relevant thermistor is not connected or has a wire break, "–99.9" is displayed.
∗2: With the factory setting, "O" is displayed. However, the indication will become valid when the parameter n020 is "1" or optional communication
expansion board is installed.
∗3: The outlined calculation value is set under the conditions; power supply voltage 200 V and pump discharge pressure: 0.2 MPa (VG32: oil
temperature 25˚C). (The error is approximately 20%.)
For a machine without a pump, contact us separately.
Operating procedure
Operation mode Data number
indicator display
1·3
Description
∗
1. Select the monitor mode.
Data display
2. Monitor the current status.
2 2
3. Return to the normal mode.
• Go to the monitor mode with the
See "Mode changing operation" on page
• The "MONITOR" lamp on the operation mode indicator lights.
∗ The value on the data number display blinks.
Change the value on the data number display to a desired
value with the or key.
When the data number is changed, the temperature
currently detected with the thermistor and input/output
values simultaneously appear on the data display.
• Press the key two times, to return to the normal mode.
See "Mode changing operation" on page
• The "NORMAL" lamp on the operation mode indicator lights.
Note
∗1
∗1
∗1
∗1
∗1
∗1
–
–
∗3
∗2
key.
17
.
17
.
23