PIM00318A_EN.fm Page 42 Tuesday, October 26, 2010 12:37 PM
CE compliance declaration
See the declaration of conformity below for a CE model (menu symbol: C).
INCORPORATION OF PARTLY
INCORPORATION OF PARTLY
COMPLETED MACHINERY
COMPLETED MACHINERY
[01] DAIKIN INDUSTRIES,LTD
1-1 Nishi-hitotsuya, Settsu-shi, Osaka, 566-8585, Japan
[02] Technical Documentation is obtained by the following authorized.
Authorized representative Sauer Bibus GmbH
Address
[03] Hereby declares that the machinery described below:
Oil Cooling Unit AKZ 9 Series
Models: AKZ149-(B)C(H)(T), AKZ149-017,020,023,024,026,027,029,030
[04] This declaration complies with the provisions of the machinery directive and the
regulations transposing it into national law, but
certificate must not be put into service until the machinery into which it is to be incorporated
has been declared in conformity with the provisions of the Machinery and their amendments.
Note)
without the manufacturer's consent
[05] Also complies with the provisions of the following European Directives:
- EMC Directive 2004/108/EC
Relevant information that should be transmitted in response to a reasoned
request by the national authorities, by the electronic method or other according
to the request.
[06] Complies with the provisions of the following harmonised standard:
- Machinery Directive: EN 378-2:2008
- EMC Directive:
[07]
1-1 Nishi-hitotsuya, Settsu-shi, Osaka, 566-8585, Japan
[08] Kenjiro
Quality Assurance Department Manager,Oil-hydraulic Division, Yo dogawa Plant
42
EC DECLARATION OF
EC DECLARATION OF
Lise-Meitner-Ring 13, D-89231 Neu-Ulm, Germany
AKZ329- (B)C(H)(T), AKZ329-017,020,023,024,026,027,029,030
AKZ439- (B)C(H)(T), AKZ439-017,020,023,024,026,027,029,030
This declaration becomes invalid if technical or operational modifications are introduced
EN 61000-6-4:2007
EN 55011:2007+ A2:2007, (group 1, class A)
EN 61000-6-2:2005
Suzuki
the machinery described in this
On 1. July. 2010