Daikin AKZ9 Series Instruction Manual page 28

PIM00318A_EN.fm Page 26 Tuesday, October 26, 2010 12:37 PM
Parameter setting procedure
3
You can set the parameter that enables the additional setting functions of the Oil Cooling Unit.
For description of the additional setting functions and parameter list, refer to page
Setting procedure
Operation Data number
mode indicator display
1
6
26
1. Select the parameter setting mode.
Data display
2. Select a parameter number.
3. Register the parameter number.
4. Change the set value.
2 2 3
5. After changing the set value, press the
6. Return to the normal mode.
4 4 5
25
.
• Go to the parameter setting mode by pressing the
five seconds.
See "Mode changing operation" on page
• The "SETTING" lamp on the operation mode indicator lights.
∗ "P" blinks on the data number display.
Change the parameter number to a desired number with
the or key.
• After the selected parameter number is displayed for approx.
0.5 seconds on the data display, the set value appears.
• Press the key to register the parameter number.
• After the number is registered, the value on the data display
blinks.
∗ "P" on the data number display remains lit.
When the value on the data display is blinking, change the set
value with the or key.
key to register it.
After the set value is registered, the value on the data display
remains lit.
∗ "P" blinks on the data number display.
• Press the key, to return to the normal mode.
See "Mode changing operation" on page
• The "NORMAL" lamp on the operation mode indicator lights.
key for
17
.
17
.