Signals To Operator Panel Front; Signals From Operator Panel Front - Siemens SINUMERIK 840D sl Function Manual

2.5.3.3

Signals to operator panel front

Signal name
Screen bright
Screen dark
Key disable
Delete Cancel alarms (HMI Advanced only)
Delete Recall alarms (HMI Advanced only)
Actual value in the WCS, (1) / MCS (0)
Unload part program
Load part program
Part program selection
File system active (0) / passive (1)
Part program handling: Number of the control data for user
file names
Part program handling: Index of the file to be transferred
from the user list
Mode change disable
For SINUMERIK 828D, the bright/dark control is realized using DB1900.DBX5000.1:
1)
DB1900.DBX5000.1=0: Screen bright
DB1900.DBX5000.1=1: Screen dark
DB1900.DBX5000.0 has no significance for the screensaver function.
Bit 7: Always 1
2)
2.5.3.4

Signals from operator panel front

Signal name
Screen is dark
Switch over MCS/WCS
Part program handling status: Error
Part program handling status: OK
Part program handling status: Active
Part program handling status: Unloading
Part program handling status: Loading
Part program handling status: Selection
FC9: Start "Measuring in JOG"
FC9 Out: Active
FC9 Out: Done
FC9 Out: Error
FC9 Out: StartErr
Basic Functions
Function Manual, 01/2015, 6FC5397-0BP40-5BA2
A2: Various NC/PLC interface signals and functions
SINUMERIK 840D sl
DB19.DBX0.0
DB19.DBX0.1
DB19.DBX0.2
DB19.DBX0.3
DB19.DBX0.4
DB19.DBX0.7
DB19.DBX13.5
DB19.DBX13.6
DB19.DBX13.7
DB19.DBX14.7
DB19.DBB16
2)
DB19.DBB17
DB19.DBX44.0
SINUMERIK 840D sl
DB19.DBX20.1
DB19.DBX20.7
DB19.DBX26.0
DB19.DBX26.1
DB19.DBX26.3
DB19.DBX26.5
DB19.DBX26.6
DB19.DBX26.7
DB19.DBX42.0
DB19.DBX45.0
DB19.DBX45.1
DB19.DBX45.2
DB19.DBX45.3
2.5 Data lists
SINUMERIK 828D
-
DB1900.DBX5000.1
1)
DB1900.DBX5000.2
-
-
DB1900.DBX5000.7
-
-
DB1700.DBX1000.7
-
DB1700.DBB1001
2)
DB1700.DBB1002
-
SINUMERIK 828D
-
DB1900.DBX0.7
DB1700.DBX2000.2
DB1700.DBX2000.1
DB1700.DBX2000.3
DB1700.DBX2000.5
DB1700.DBX2000.6
DB1700.DBX2000.7
-
-
-
-
-
75