Channelspecific Machine Data - Siemens SINUMERIK 840D sl Function Manual

A3: Axis Monitoring, Protection Zones
3.6 Data lists
Protection zones
Number Identifier: $MN_
10618 PROTAREA_GEOAX_CHANGE_MODE
18190 MM_NUM_PROTECT_AREA_NCK
3.6.1.2

Channelspecific machine data

Axis monitoring functions
Number Identifier: $MC_
20150 GCODE_RESET_VALUES
21020 WORKAREA_WITH_TOOL_RADIUS
24130 TRAFO_INCLUDES_TOOL_1
24230 TRAFO_INCLUDES_TOOL_2
24330 TRAFO_INCLUDES_TOOL_3
24426 TRAFO_INCLUDES_TOOL_4
24436 TRAFO_INCLUDES_TOOL_5
24446 TRAFO_INCLUDES_TOOL_6
24456 TRAFO_INCLUDES_TOOL_7
24466 TRAFO_INCLUDES_TOOL_8
24476 TRAFO_INCLUDES_TOOL_9
24486 TRAFO_INCLUDES_TOOL_10
25106 TRAFO_INCLUDES_TOOL_11
25116 TRAFO_INCLUDES_TOOL_12
25126 TRAFO_INCLUDES_TOOL_13
25136 TRAFO_INCLUDES_TOOL_14
25146 TRAFO_INCLUDES_TOOL_15
25156 TRAFO_INCLUDES_TOOL_16
25166 TRAFO_INCLUDES_TOOL_17
25176 TRAFO_INCLUDES_TOOL_18
25186 TRAFO_INCLUDES_TOOL_19
25196 TRAFO_INCLUDES_TOOL_20
28600 MM_NUM_WORKAREA_CS_GROUPS
172
Description
Protection zone for switchover of geo axes
Number of files for machinerelated protection zones
Description
Initial setting of the G groups
Allowance for tool radius with working area limitation
Tool handling with active transformation 1.
Tool handling with active transformation 2.
Tool handling with active transformation 3.
Tool handling with active transformation 4.
Tool handling with active transformation 5.
Tool handling with active transformation 6.
Tool handling with active transformation 7.
Tool handling with active transformation 8.
Tool handling with active transformation 9.
Tool handling with active transformation 10.
Tool handling with active transformation 11.
Tool handling with active transformation 12.
Tool handling with active transformation 13.
Tool handling with active transformation 14.
Tool handling with active transformation 15.
Tool handling with active transformation 16.
Tool handling with active transformation 17.
Tool handling with active transformation 18.
Tool handling with active transformation 19.
Tool handling with active transformation 20.
Number of coordinate system-specific working area
limitations
Function Manual, 01/2015, 6FC5397-0BP40-5BA2
Basic Functions