Call Pick-Up (Direct); Outgoing Trunk Queuing; Off-Hook Trunk Queuing - NEC DT830 Series User Manual

CALL PICK-UP (DIRECT)

DT830 DT430/410
To Program Pick- up Direct Key (One-
Touch Speed Calling Key)
STEP 1: Press
Feature
STEP 2: Press the One-Touch Speed Calling key.
STEP 3: Dial the "Direct Call Pick-up" access code.
STEP 4: Press
Feature
When A Station Within System Rings
STEP 1: Lift the handset, receive a dial tone.
STEP 2: Press the PICK-DIRECT key and dial the sta-
tion number to be picked up.
STEP 2: Dial the "Direct Call Pick-up" access code and
the station number to be picked up.
STEP 3: Connection to calling party is established.
STEP 4: If busy, the original call must be placed on
hold before new call can be picked up.
PICK UP
1:25 PM
key.
key again.
– OR –
Called Calling
station party
2000 DDD 3
MON 11 MAY 2015

OUTGOING TRUNK QUEUING

DT830 DT430/410
If Trunk Is Busy
STEP 1: Receive Trunk Busy indication. Press the
CALL BACK key, Call is placed in queue for
next available trunk.
STEP 2: When trunk is available, the setting station is
alerted by ringing and flashing red LED.
Speaker
STEP 3: Press
tone is heard or number is automatically di-
aled if Least Cost Routing is provided.
OG-Q SET
1:25 PM

OFF-HOOK TRUNK QUEUING

DT830 DT430/410
Speaker
STEP 1: Press
STEP 2: Dial desired telephone number. Encounter a
trunk busy condition.
STEP 3: A station user receives a service set tone and
leaves speaker on.
STEP 4: The desired number is automatically dialed
when a trunk becomes available.
142
key or lift the handset. A dial
MON 11 MAY 2015
key, receive a dial tone.