TO LOGIN
Follow the steps below to open the Web Programming.
Internet browser
STEP 1: Start up
STEP 2: Enter IP address of the target DT830 Series on the address toolbar and then press Enter key.
STEP 3: The Web Programming Login screen appears. Enter a user name (type "USER") and a password, then click
OK
.
Note:
Enter the password you assigned on the procedure
"0000" is used as password by the default setting.
Note:
For IP address of the terminal, contact the system administrator.
Note:
When the login screen does not appear, check the LAN connection status and entered IP address. If the problem
persists, please contact the system administrator.
on the PC.
"TO CHANGE
240
PASSWORD".