Call Forwarding - Don't Answer - NEC DT830 Series User Manual

CALL FORWARDING - DON'T ANSWER

DT830 DT430/410
To Set
Speaker
STEP 1: Press
STEP 2: If setting for another station, press the
TILINE feature key
STEP 3: Press the FWD-NA key or dial "Call Forward-
ing – Don't Answer" access code. Receive a
special dial tone.
STEP 4: Dial the destination station or the external
telephone number. Receive a service set
tone.
STEP 5: The FWD-NA key's LED lights (at your station
or at the terminal of the multiline station you
are setting).
Speaker
STEP 6: Press
Answer is set.
FORWARD SET
1:25 PM
key. Receive a dial tone.
.
key. Call Forwarding – Don't
Forwarding
station
2000
MON 11 MAY 2015
Using Soft Key
STEP 1: Press the CF-NoAns soft key. Receive a spe-
cial dial tone.
STEP 2: Dial the destination; wait for a service set
tone.
MUL-
STEP 3: "FORWARD SET" is displayed; Call Forward-
ing – Don't Answer is set.
To Verify (Only For Terminal With LCD)
STEP 1: If verifying for another station, press the
MULTILINE feature key while an idle state.
STEP 2: Press the FWD-NA key.
STEP 3: The display indicates the station number calls
are forwarded to.
Note: Call Forwarding for Busy Line and Don't Answer
may be combined depending upon system pro-
gramming.
Note:
With soft key operation, the CF-NoAns flashes
on the display.
149
FORWARD SET
1:25 PM MON 11 MAY 2015
Mic
Forwarding
FORWARD
1:25 PM MON 11 MAY 2015
>>>
station
2000