Introduction To The Detector - Agilent Technologies 1260 Infinity G1315C User Manual

1
Introduction

Introduction to the Detector

Introduction to the Detector

The detector is designed for highest optical performance, GLP compliance and
easy maintenance. It includes the following features:
• 80 Hz data acquisition rate for (ultra-) fast LC applications (requires
• data recovery (DRC) feature provides data-never-lost insurance (requires
• RFID tags for all flow cells and UV-lamps provides traceable information
• long-life deuterium with RFID tag and tungsten lamps for highest intensity
• no loss in sensitivity for up to eight wavelengths simultaneous,
• programmable slit from 1 – 16 nm for complete optimization of sensitivity,
• optional flow-cell cartridges with RFID tag (standard 10 mm13 μL,
• easy front access to lamps and flow cell for fast replacement, and
• built-in holmium oxide filter for fast wavelength accuracy verification,
• built-in temperature control for improved baseline stability,
• additional diagnostic signals for temperature and lamp voltage monitoring,
For specifications, see
10
internal hard disk, G1315C and G1365C only),
internal hard disk, G1315C and G1365C only),
about these assemblies,
and lowest detection limit over a wavelength range of 190 – 950 nm,
linearity and spectral resolution,
semi-micro 6 mm5 μL, micro 3 mm2 μL, 80 nL, 500 nL, 10 mm, high
pressure 10 mm1.7 μL and prep-cells) are available and can be used
depending on the application needs,
"Performance Specifications"
Agilent 1260 Infinity DAD and MWD User Manual
on page 24.