First Aid - Aiphone JKTLI Operation Manual

DEFAULTS
The red LED on the JKTLI box doesn't light
JKTLI doesn't ring the programmed number
Inopportune switching in communication when
the external number is called.
AIPHONE

FIRST AID

Check polarity on Power Supply
(see cabling procedure)
Check if Power Supply Voltage is enough
(12V DC – 0,5A)
Check connection of the telephone line on
terminal 'CO LINE'.
Re-program the call number (see 3.2.3).
* JKTLI is installed on an internal line of a
PABX: tones are different from those basically
programmed in JKTLI. Please contact
AIPHONE HOT LINE to do an automatic
programming of the tones.
* JKTLI is connected to a PBX telephone line:
tones are different from those basically
programmed in JKTLI.
Please contact AIPHONE HOT LINE which
will help you to enter the right values.
34
TO DO
31.08.11 – V1.0