Page 1
JPTLIIP IP INTERFACE FOR JP SYSTEM OPERATION MANUEL 22.07.15 – V1.1 AIPHONE...
Page 2
5. For power supply, use Aiphone power supply model specifications. This manual was created by Aiphone Co., Ltd., all specified for use with system. If non-specified product is used, fi re or malfunction could result.
- fixed on the wall: to do this action, it must be fixed with 2 crews with plugs adapted of the supporting material. Don’t install JPTLIIP near heating equipment that varies in temperature and near subject to moisture and humidity extremes.
Interface is not registered on AIPHONE’s server 5-blinking every seconds USING THE SYSTEM JPTLIIP interface allow audio and video call transfer from the AIPHONE JP series door station to 2 smartphones with Androïd or Apple software. ATTENTION! To get an audio or video good reception, your smartphone must receive phone calls by WIFI or 3G/4G (3G minimum) mode.
When a call is placed on the Door Station, the image from this one appear on the video station and send automatically the video onto 2 Smartphone. Without answer with the Smartphone, the JPTLIIP goes back into Stand-by mode into the next call.
Page 6
5 seconds (Door1 Name) Operating time of the relay 2 5 seconds (Door2 Name) Operating time of the relay 3 (JPTLIIP) 5 seconds (Optional Relay Name) End of communication after activation of relay End of communication after activation of relay...
QUICK DEBUG DEFAUTS VERIFICATIONS The JPTLIIP Status Led don’t turn ON - Check the Power Adaptor is well plugged The call activate to the JP4MED but not - Check the selector is on « ON » Position activate the JPTLIIP Interface - Check the connection on the «...
Page 8
ANDROÏD Version Function Smartphone Launching Screen : Running Application : you can receive call Application Launching NB: If you close the application, you will not able to receive call. To return to Stand-by Mode, push 22.07.15 – V1.1 AIPHONE...
Page 9
, Audio / Video communication begin : Call answering If you push the JPTLIIP go Stand-by Mode. Caution! The call will not send to the voice mail. If the area is not covert by 3G/4G network, you will only have audio call : 22.07.15 –...
Page 10
- Activate or deactivate the micro (private mode) with . The symbol below become red: the micro is deactivate. Disabling function - Activate or deactivate the video with . The symbol below become red: the video is deactivate. 22.07.15 – V1.1 AIPHONE...
Page 11
Move the green symbol to the grey symbol For opening the 1st Entry choose : Door opening and optional relay For opening the 2 Entry choose : For activate the optional relay (3rd Entry or else) choose : 22.07.15 – V1.1 AIPHONE...
Page 12
Alarm Activated Screen: When the key “ ”, you will have the message “ Alarm Alarm Functioning activated” and the following screen 22.07.15 – V1.1 AIPHONE...
Page 13
Version(APPLE) Fonction Smartphone Launching Screen : Running Application : you can receive call Application Launching To return to Stand-by Mode, push the IPhone “Home” Button 22.07.15 – V1.1 AIPHONE...
Page 14
To permit the application remains in stand-by mode, you must activate the “AiphoneJP” notifications: 22.07.15 – V1.1 AIPHONE...
Page 15
Push , Audio / Video communication begin : If you push the JPTLIIP go Stand-by Mode. Caution! The call will not send to the voice mail. If the area is not covert by 3G/4G network, you will only have audio call : Call answering 22.07.15 –...
Page 16
- Activate or deactivate the micro (private mode) with . The symbol below become red: the micro is deactivate. Disabling function - Activate or deactivate the video with . The symbol below become red: the video is deactivate. 22.07.15 – V1.1 AIPHONE...
Page 17
Move the green symbol to the grey symbol Door opening and optional relay For opening the 1st Entry choose : For opening the 2 Entry choose : For activate the optional relay (3rd Entry or else) choose : 22.07.15 – V1.1 AIPHONE...
Page 18
Alarm Activated Screen: When the key “ ”, you will have the message “ Alarm Alarm Functioning activated” and the following screen 22.07.15 – V1.1 AIPHONE...
Stand-by 350mA, when relay is on 430mA. Standards: EN60950 EN55022 Edition 98 Classe B EN55024 Edition 98 Classe B Exit Contact: 1 (N.O., N.F.) Programming: By Internet. Saving of parameters: No volatile memory Material : ABS module 22.07.15 – V1.1 AIPHONE...
Page 20
Distributed par AIPHONE Print in France 22.07.15 – V1.1 AIPHONE...