Table of Contents
Advertisement
3.4.10 External communication level – Functions 08 & 09
Programming of audio level from the panel to the remote telephone set :
* 2000 # (3 short beeps) 08 (long beep) XX (long beep)
With XX = level chosen – 2 digits 00 (max level) to 31 (min level).
Default setting = 15.
Programming of audio level from the remote telephone set to the panel:
* 2000 # (3 short beeps) 09 (long beep) XX (long beep)
With XX = level chosen – 2 digits 00 (max level) to 31 (min level).
Default setting = 15.
3.4.11 JK-1MED ringing time in transfer mode – Function 64
Default setting = 10.
When transfer is activated, press on Call-button of panel rings first JK-1MED. This ringing time can
be programmed.
* 2000 # (3 short beeps) 64 (long beep) XX (long beep)
With XX = time in seconds – 2 digits (01 to 40).
3.5 Tones Programming
When a phone number is dialled, the only way to know if the called party answers the call or is busy
or cut the communication is to recognize the tones sending by the telephone operator.
Three tones must be recognizing:
-
ringing tone : this tone is received when the called telephone set is ringing,
-
busy tone : this tone is received when the called party is still in communication and
sometimes also when the called party cut the communication,
-
end of communication (EOC): this tone is sometime sent when the called party cut the
communication.
A tone is a sequence of sounds and silences. The tones can be different from country to country, from
Telephone Operator and Pabx.
The values of these tones must be programmed inside the system.
This programming can be done automatically when connected behind a Pabx.
This programming can be done manually when connected behind a Pabx or on a public telephone line.
At delivery time, JKTLI is programmed to recognize the country tones.
3.5.1 Switching modes into communication with external telephone – Function 95
Default setting = 0
* 2000 # (3 short beeps) 95 (long beep) X (long beep)
With X =
- 0 : switching into communication if end of ringing tone detected,
- 1 : switching into communication if DTMF detected (any figure).
AIPHONE
20
31.08.11 – V1.0
Advertisement
Table of Contents
