Table of Contents
Advertisement
3.3 Remote Control (relay)
3.3.1 Remote control for JK-1MED relay
Default door release code = 10
Programming DTMF Code for activating the relay – Function 25:
From the handset called ie to activate the relay, the person answering the call must enter a 2
digit(s) code on the keypad of the handset.
* 2000 # (3 short beeps) 25 (long beep) XX # (3 short beeps)
With XX = DTMF code – 2 digits.
Example: DTMF code required is 19
* 2000 # (3 short beeps) 25 (long beep) 19# (3 short beeps)
To delete a code, simply press # after receiving the long beep.
Programming Operating time for the relay – Function 31
Default setting = 05.
For how many seconds is the relay to operate when activated. Minimum 1 second, maximum 10
seconds.
* 2000 # (3 short beeps) 31 (long beep) YY (3 short beeps)
WithYY = time in seconds – 2 digits.
Example: time required is 9 seconds
* 2000 # (3 short beeps) 31 (long beep) 09 (3 short beeps)
3.3.2 Remote control for JKTLI relay
Default door release code = 20
Programming DTMF Code for activating the relay – Function 30:
From the handset called ie to activate the relay, the person answering the call must enter a 2
digit(s) code on the keypad of the handset.
* 2000 # (3 short beeps) 30 (long beep) XX # (3 short beeps)
With XX = DTMF code – 2 digits.
Example: DTMF code required is 04
* 2000 # (3 short beeps) 30 (long beep) 04# (3 short beeps)
To delete a code, simply press # after receiving the long beep.
Programming Operating time for the relay – Function 32
Default setting = 05.
For how many seconds is the relay to operate when activated. Minimum 1 second, maximum 10
seconds.
* 2000 # (3 short beeps) 32 (long beep) YY (3 short beeps)
With YY = time in seconds – 2 digits.
Example: time required is 8 seconds
* 2000 # (3 short beeps) 32 (long beep) 08 (3 short beeps)
AIPHONE
16
31.08.11 – V1.0
Advertisement
Table of Contents
