Aiphone JKTLI Operation Manual page 28

Activation and deactivation of the transfer mode are available from:
- Internal telephone set :
On this telephone set, press :

#*0 to disable the 'transfer mode'. The correspondent hears the message 10 ('Routing off')
or 3 short beeps.

#*1 to validate the 'transfer mode'. The correspondent hears the message 9 ('Routing on')
or 3 short beeps.
- External telephone set :
Dial the telephone line number on which is installed JKTLI. The internal telephone set rings.
After the delay programmed, the system answers. The caller hears 'Call from door panel' or 3
short beeps. He can dial:

#*0 to disable the 'transfer mode'. The caller hears the message 10 ('Routing off') or 3
short beeps.

#*1 to validate the 'transfer mode'. The caller hears the message 9 ('Routing on') or 3
short beeps.
Activation and deactivation of Call-button of the panel are available from:
- Internal telephone set :
On this telephone set, press:

#*# to disable the Call-button. The correspondent hears 3 short beeps.

#** to reactivate the Call-button. The correspondent hears 3 short beeps.
- External telephone set:
Dial the telephone line number on which is installed JKTLI. The internal telephone rings. After
the delay programmed, the system answers. The caller hears 'Call from door panel' or 3 short
beeps. He can dial:

#*# to disable the Call-button. The caller hears 3 short beeps.

#** to reactivate the Call-button. The caller hears 3 short beeps.
No answer Mode
To deactivate the JKTLI system, from an external telephone set, call the JKTLI, dial #00 in the
eight first seconds. From now, for the next call, JKTLI does not answer.
AIPHONE
28
31.08.11 – V1.0