Table of Contents
Advertisement
3.4.7 Country Selection – Function 05
As tones are different from a Country to another one, it is necessary to choose the Country where is
used JKTLI.
* 2000 # (3 short beeps) 05 (long beep) XX (long beep)
With XX = Telephone Country Code (01 = United States, 09 = Portugal, 10 = Luxembourg, 11 =
Ireland, 32 = Belgium, 33 = France, 34 = Spain, 39 = Italy, 41 = Switzerland, 44 = UK,
49 = Germany, 61 = Australia, 86 = China.).
Example: JKTLI used in Australia
* 2000 # (3 short beeps) 05 (long beep) 61 (long beep)
This procedure does the following programming:
- choose basics parameters (as function 29) : tones, call-numbers,...
- select the language of the voice messages:
- in English for USA, Portugal, Ireland, UK.
- in French for Luxembourg, France, Switzerland.
- in Flemish pour Belgium.
- in Spanish for Spain.
- in German for Germany.
- in Italian for Italy.
3.4.8 Language Selection for Voice messages – Function 78
Two models of voice messages daughter boards are available depending on the language.
So, first use the right daughter board and then select the good language.
To choose the language of the voice messages, do the following programming.
* 2000 # (3 short beeps) 78 (long beep) Y (long beep)
With Y=
-
0 for French language (voice messages daughter boards #1)
-
1 for English language (voice messages daughter boards #1)
-
2 for Flemish language (voice messages daughter boards #1)
-
3 for Spanish language (voice messages daughter boards #2)
-
4 for German language (voice messages daughter boards #2)
-
5 for Italian language (voice messages daughter boards #2)
Note: French, English and Flemish languages are on voice messages card 1. Spanish, German and
Italian languages are on voice messages card 2.
3.4.9 Local communication level – Functions 06 & 07
Programming of audio level from the panel to the resident telephone set :
* 2000 # (3 short beeps) 06 (long beep) XX (long beep)
With XX = level chosen – 2 digits 00 (max level) to 31 (min level).
Default setting = 15.
Programming of audio level from the resident telephone set to the panel:
* 2000 # (3 short beeps) 07 (long beep) XX (long beep)
With XX = level chosen – 2 digits 00 (max level) to 31 (min level).
Default setting = 15.
AIPHONE
19
31.08.11 – V1.0
Advertisement
Table of Contents
