Remote Panels (Optional) - Kohler 15CCO Service Manual

Remote Start Panel
Allows starting/stopping from a location remote of the
generator set. Supplied with 15 ft. (4.6 m) connection
harness. Overall mounting dimensions are 4.06 in. (103
mm) by 2.12 in. (54 mm). Generator sets are equipped
with a 6-pin connector on controller for connection of the
kit. See Figure 2-6 and Figure 2-7.
Figure 2-6. Remote Start Panel
TP-5606 6/02
Remote Panels
(Optional)
P3-2
(P3-4)
TT-872
+ -
P
Stop/Preheat
Local
10 A.
Switch
Fuse
3(47)
P
Start
P1-14 P2-4
Relay
K2
Circuit
Board
K1
P2-3
P2-7
53(70) 3(47)
Grey/
Black
P3-4
(P3-5)
Stop/
Violet
Preheat
Yellow/
Red
Start
Gen. 'ON'
Light
NOTE
Wire and pin numbers for
single-phase systems may differ
from those for three-phase systems,
where they are different, the
single-phase numbers are shown
first followed by the three-phase
numbers in parentheses.
NOTE
Remote Start Panel harness is not
color coded. Lead 2(43) connects to
J3-6. Lead 3(47) connects to J3-5.
Lead 4(N) connects to J3-1. Lead
53(70) connects to J3-4. Color
coded leads used on remote
harnesses only.
NOTE
When the Start-Stop/ Preheat
Switch is in the Start position,
contacts 3 and 4 are closed.
Figure 2-7. Remote Start Panel Kit
N
P1-9
2(43) 4(N)
P2-5 P2-6
P2-8
P2-9
4(N)
2(43)
P3-1
P3-5
Black
(P3-6)
Remote
Switch
TT-872
Operation 2-7