Omron SYSDRIVE 3G3JV Series User Manual page 54

Test Run
WARNING
Turn ON the input power supply only after mounting the front cover,
!
terminal covers, bottom cover, Operator, and optional items. Not
doing so may result in electrical shock.
WARNING
Do not remove the front cover, terminal covers, bottom cover,
!
Operator, or optional items while the power is being supplied. Not
doing so may result in electrical shock.
WARNING
Do not operate the Operator or switches with wet hands. Doing so
!
may result in electrical shock.
WARNING
Do not touch the inside of the Inverter. Doing so may result in
!
electrical shock.
WARNING
Do not come close to the machine when using the error retry function
!
because the machine may abruptly start when stopped by an alarm.
Doing so may result in injury.
WARNING
Do not come close to the machine immediately after resetting
!
momentary power interruption to avoid an unexpected restart (if
operation is set to be continued in the processing selection function
after momentary power interruption is reset). Doing so may result in
injury.
WARNING
Provide a separate emergency stop switch because the STOP Key
!
on the Operator is valid only when function settings are performed.
Not doing so may result in injury.
WARNING
Be sure confirm that the RUN signal is turned OFF before turning ON
!
the power supply, resetting the alarm, or switching the
LOCAL/REMOTE selector. Doing so while the RUN signal is turned
ON may result in injury.
Caution Be sure to confirm permissible ranges of motors and machines be-
!
fore operation because the Inverter speed can be easily changed
from low to high. Not doing so may result in damage to the product.
Caution Provide a separate holding brake when necessary. Not doing so
!
may result in injury.
4-2
Chapter 4