Preparation And Use - Clarke CROS3 Operation & Maintenance Instructions Manual

PREPARATION AND USE

FITTING A SANDING DISC
1. Select the disc to be used.
• This MUST be the correct
125mm diameter disc with
hook and loop backing.
2. Ensure the sander is switched off
and the plug is removed from the
socket.
3. Line up the holes in the disc with those on the sanding pad.
• This is necessary for dust extraction purposes.
4. Press the disc firmly onto the pad to secure it.
ADJUSTING THE AUXILIARY HANDLE
1. Loosen the handle adjustment
knob.
2. Adjust the handle to the required
position.
3. Retighten the handle adjustment
knob.
DUST COLLECTION
Slide the dust bag onto the outlet as
shown.
The dust bag must be emptied
regularly:- do not wait until it is
completely full.
The dust bag is emptied as follows.
1. Ensure the sander is not running.
2. Gently remove the dust bag assy
from the sander.
3. Take the dust bag to the dustbin and slip the bag off, (the bag has an
elasticated top), empty the bag into the bin.
4. Reassemble the dust bag assy and fit back on to the sander.
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
9