Table of Contents
Advertisement
MAINTENANCE
• Always inspect the sander before use and ensure it is in top
condition.
• Ensure all air vents are clear. (Use vacuum cleaner to clean the
machine where possible).
• Check the power cable to ensure it is sound and free from cracks,
bare wires etc. Avoid using solvents when cleaning plastic parts,
(most plastics are susceptible to damage from the various types of
commercial solvents).
• All bearings etc., in this tool are lubricated with sufficient high grade
lubricant for the machine's lifetime under normal operating
conditions, therefore no further lubrication is required.
REPLACEMENT DISCS
GRIT SIZE
60 grit (pack of 5)
100 grit (pack of 5)
150 grit (pack of 5)
ENVIRONMENTAL RECYCLING POLICY
Through purchase of this product, the customer is taking on the
obligation to deal with the WEEE in accordance with the WEEE
regulations in relation to the treatment, recycling & recovery and
environmentally sound disposal of the WEEE.
In effect, this means that this product must not be disposed of with general
household waste. It must be disposed of according to the laws governing
Waste Electrical and Electronic Equipment (WEEE) at a recognised disposal
facility.
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
PART NUMBER
6463051
6463052
6463053
11
Advertisement
Table of Contents
