Siemens Synco OZW772 Series Commissioning Instructions page 55

Services
Siemens
Building Technologies
The following information displays the current serve settings.
The service settings are made in Section 2.5.3, Operating page "Settings"
Path: Home > 0.2.150 OZW772.> Device information > Services
Data point
ACS access
Web access via http
UPnP localization
ETS access via
KNXnet/IP
Portal connection
Automatic log off
Web server OZW772... V6.0
Operate using a web browser
Explanation, example
With "On" access to ACS operating software is
permitted on the Web Server. With "Off", there is
not access (only via direct connection – not
possible via the portal).
With "On" access is permitted with http and
https. With "Off" access is only permitted with
https.
UPnP localization can be disabled (---) or set on
Ethernet or USB.
"On" permits access to the plant using the ETS
software via KNXnet/IP. "Off" does not permit
access (only via direct connection – via portal is
not possible).
With "On" data exchange with the portal is
activated. With "Off" there is no exchange of
data.
"Absolute timeout" automatically disconnects to
the Web Server after 24 hours.
55 / 176
CE1C5701en
2015-10-12