Siemens Synco OZW772 Series Commissioning Instructions page 145

Description of data
point types
System time and faults
All following data points
Siemens
Building Technologies
Below is a listing of all available data point types, data point sub-types, and
possible settings.
Data point number 1...7: Standard data points
Setting for ID/Decoding is defaults on these data points:
Number/name
1: System time
2: Date
3: Time of day
4: Fault information
5: Confirm faults
6: Fault state (normal/faulty)
7: Fault transmission (enable/disable)
The following setting options are available on all following data point types:
· A data point is Enabled/disabled via the setting option alongside
"Value xx"
· A data point is assigned a page via the setting option
"Web Server page"
· A name is assigned to a data point in the field "data point name", e.g. instead of
the default name "Data point type/one-up number"
· A meaningful name such as
Web server OZW772... V6.0
KNX S-Mode
ID Decoding
19.001 Date / Time
11.001 Date
10.001 Time of day
219.001 Alarm Info
1.016 Confirm
1.005 Alarm
1.003 Release
145 / 176
CE1C5701en
2015-10-12