Siemens Synco OZW772 Series Commissioning Instructions page 38

38 / 176
Siemens
Building Technologies
The router settings below are required, when
· Accessing the Web Server from outside the local area network without using the
portal.
· A message is send via email for a fault.
A static IP address or Dynamic DNS-capable router with Dynamic DNS service is
prerequisite for operation via Internet.
Settings:
· NAT/PAT: Translate public to private IP addresses and ports
· Dynamic DNS: The dynamic IP address for the connection must be published if
no fixed public IP address is available.
Settings depend on network type and application. The different variants are
described in Section 8.1.3, "Access via direct connection".
Web server OZW772... V6.0
Commissioning
CE1C5701en
2015-10-12