Specifications - Sony DHC-MD555 Operating Instructions Manual

Specifications

Main Unit (HCD-MD555)
Amplifier section
For the U.S. model
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
With 6 ohm loads, both channels driven, from
70 – 20,000 Hz; rated 25 watts per channel minimum
RMS power, with no more than 0.9% total harmonic
distortion from 250 milliwatts to rated output.
European model:
DIN power output (Rated)
Continuous RMS power output (Reference)
Music power output (Reference)
Other models:
DIN power output (Rated)
Continuous RMS power output (Reference)
Peak music power output (Reference)
Inputs
DVD/VIDEO IN (phono jacks) (switchable)
DVD IN:
VIDEO IN:
TAPE IN (phono jacks):
MD WALKMAN LINK IN (stereo mini jack):
30 + 30 watts (6 ohms at
1 kHz, DIN, 230 V)
40 + 40 watts (6 ohms at
1 kHz, 10% THD)
60 + 60 watts
30 + 30 watts (6 ohms at
1 kHz, DIN, 120/240 V)
40 + 40 watts (6 ohms at
1 kHz, 10% THD)
700 watts
voltage 450 mV,
impedance 47 kilohms
voltage 250 mV,
impedance 47 kilohms
voltage 250 mV,
impedance 47 kilohms
voltage 125 mV,
impedance 15 ohms
Outputs
TAPE OUT (phono jacks):
PHONES (stereo mini jack):
SPEAKER:
CD player section
System
Laser
Laser output
Frequency response
MD deck section
System
Laser
Laser output
Recording time
Sampling frequency
Frequency response
voltage 250 mV,
impedance 1 kilohm
accepts headphones of
8 ohms or more.
accepts impedance of 6 to
16 ohms.
Compact disc and digital
audio system
Semiconductor laser
( = 780 nm)
Emission duration:
continuous
Max. 44.6 µW*
* This output is the value
measured at a distance of
200 mm from the
objective lens surface on
the Optical Pick-up Block
with 7 mm aperture.
2 Hz to 20 kHz
MiniDisc digital audio
system
Semiconductor laser
( = 780 nm)
Emission duration:
continuous
Max. 44.6 µW*
* This output is the value
measured at a distance of
200 mm from the
objective lens surface on
the Optical Pick-up Block
with 7 mm aperture.
74 minutes max. (using
MDW-74)
44.1 kHz
5 Hz to 20 kHz
continued
97