Sony DHC-MD555 Operating Instructions Manual page 7

To connect the FM antenna
1 Insert the antenna cord into the FM
antenna terminal.
Jack type A
Jack type B
Insert this
portion.
2 Pull gently on the antenna cord to
make sure it is connected correctly.
If the antenna cord pulls out, connect
it again.
To extend the FM antenna
Tune in an FM station and fasten the
antenna to a position that provides good
reception.
4
Adjust the operating voltage (for
models with a voltage selector).
Before connecting the power cord, set
VOLTAGE SELECTOR on the rear panel
to the position of the local power line
voltage.
110-120V
VOLTAGE SELECTOR
5
After finishing all speaker and
antenna connections, connect the
power cord to a wall outlet.
Plug Adapter (except for North
American and European models)
If the plug of this system does not fit
your wall outlet, attach the supplied
adapter on to the plug.
When you connect the power cord, only
the 1/u (power) indicator lights red.
1/u (power) indicator
To display the clock at this time, see
"Showing the time" on page 9.
220-240V
continued
7