Optional Components - Sony DHC-MD555 Operating Instructions Manual

Symptom Cause and countermeasure
The sound from The recording level is set too low (or too high).
an MD you
m Readjust the recording level (see page 48).
recorded is too
low (or too high).
You cannot edit. The MD is not loaded (to the recording/playing unit).
m Press 6 to load the MD you want to edit.

Optional components

Symptom Cause and countermeasure
There is no sound. The system is not set properly.
m Refer to General item "There is no sound." under "Troubleshooting" on page
The optional A/V component is not connected properly.
m Connect the component properly (see pages 75, 78 and 79) while checking:
The connected component is not turned on.
m Turn on the connected component.
The connected component has not started playing.
m Refer to the operating instructions included with the connected component and
The sound from
FUNCTION is set to "VIDEO".
the DVD player is m Set FUNCTION to "DVD". (If "VIDEO" is selected for FUNCTION, press
too loud or
distorted.
The sound from FUNCTION is set to "DVD".
the VCR is at a
m Set FUNCTION to "VIDEO". (If "DVD" is selected for FUNCTION, press
low volume.
85 and check the condition of the system.
• if the cords/cables are connected properly.
• if the cord/cable connectors are firmly inserted all the way.
start playing.
MENU/NO and then press ENTER/YES to switch to "DVD". The maximum
level of the signals output by a DVD player is different from that of other
analog components, always be certain to switch to "DVD" when listening to
sound from a DVD player. If FUNCTION is not set properly, the system may
malfunction.)
MENU/NO and then press ENTER/YES to switch to "VIDEO". The maximum
level of the signals output by a DVD player are different from that of other
analog components, always be certain to switch to "VIDEO" when changing a
connected component from a DVD player to a VCR or other such component.
If FUNCTION is not set properly, the system may malfunction.)
continued
91