Erasing All Tracks; All Erase Function - Sony DHC-MD555 Operating Instructions Manual

Erasing recordings (continued)
1 1
4,5 3 4,6
1
Press FUNCTION repeatedly to
switch the function to MD.
2
Press MD D.SKIP on the remote
repeatedly until the button of the
desired MD lights green.
If the MD appears in the slot, press 6 to
load the MD (to the recording/playing
unit).
3
Press MENU/NO so that
"Edit Menu" appears.
4
Turn MULTI JOG until "Tr Erase ?"
appears, then press ENTER/YES.
The MD deck starts playing the
displayed track.
5
Turn MULTI JOG until the desired
track number appears.
Desired track number
54
p
MD 1 – 5
·
p
P
·
P p
0 )
6 6 6 6 6
6
Press ENTER/YES.
"Complete!!" appears for a few seconds
and the selected track and title are
erased. The MD deck starts playing the
track following the erased track.
To cancel the Tr Erase Function
Press p for the MD.
To return to the condition before
erasing
You can return to the original condition
immediately after erasing a track (see
page 61).
Note
"Tr Erase ???" appears when the track was recorded
or edited on another deck and is record protected.
To erase the track, press ENTER/YES while
"Tr Erase ???" is displayed.

Erasing all tracks

(All Erase Function)

You can erase the disc title, all recorded
tracks and their titles at once.
1
MD 1 – 5
6
4
1
Press FUNCTION repeatedly to
switch the function to MD.
p
·
p
P
·
P p
0 )
6 6 6 6
3 4,5