Listening To The Sound Of Connected A/V Components - Sony DHC-MD555 Operating Instructions Manual

Connecting a TV, VCR,
DVD player, etc.
Connect the component to the DVD/VIDEO
IN jacks on the system.
A
B
DVD/VIDEO
DVD/VIDEO
IN jacks
IN jacks
To the audio output
of a component
TV, VCR,
DVD player, etc.
Tip
The system does not support Dolby Pro Logic, so
you cannot listen to material played back on a DVD
player with Dolby Digital or Dolby Pro Logic. In
addition, this system cannot make a digital
recording from a disc that was recorded with Dolby
Digital.
* DOLBY, the double-D symbol a, the Dolby
Digital and "PRO LOGIC" are trademarks of
Dolby Laboratories Licensing Corporation.
Listening to the
sound of connected
A/V components
0
6 6
2
MENU/NO
1
Prepare the connected analog
component.
2
Press FUNCTION repeatedly to
select "TAPE" or "VIDEO".
Sound source
Tape deck
TV
VCR
DVD player
* To select "DVD", press FUNCTION
repeatedly to select "VIDEO" then press
MENU/NO and press ENTER/YES. The
maximum level of the signals output by a
DVD player is different from that of other
analog components, so always be certain to
switch to "DVD" when listening to sound
from a DVD player.
Furthermore, to change back to "VIDEO"
when changing the connected component
from the DVD player to a VCR or other such
component, press FUNCTION repeatedly to
select "DVD", then press MENU/NO and
press ENTER/YES. Failure to change the
FUNCTION setting before using the VCR or
other such component may result in
malfunction.
· p
P
·
P p
)
6 6 6
ENTER/YES
FUNCTION
TAPE
VIDEO
VIDEO
DVD*
79