Erasing Recordings; Erase Function; Erasing All Tracks - Sony CMT-M333NT Operating Instructions Manual

Erasing recordings

— Erase Function

The MD deck lets you erase unwanted tracks
quickly and easily.
You can restore the erased contents using the
Undo function immediately after the erasing
(page 34). However, you cannot restore the
erased contents after performing other editing.
Before erasing, make sure if it is all right to erase
the content.
The three options for erasing recordings are:
• Erasing a single track (Track Erase Function)
• Erasing all tracks (All Erase Function)
• Erasing a portion of a track (A-B Erase
Function)
Erasing a single track
— Track Erase Function
When you erase a track, the total number of
tracks on the MD decreases by one and all the
tracks following the erased one are renumbered.
Example: Erasing track 2
Track number
1 2 3
Original
A B
tracks
1 2
After
A C
ERASE
As the track numbers are renumbered as above,
it is recommended to erase from the latter tracks
when erasing several tracks, so as not to change
the track numbering of unerased tracks.
1
Press FUNCTION repeatedly to switch
the function to MD.
2
Press MENU/NO.
3
Press . or > repeatedly until "Tr
Erase?" appears, then press ENTER/
YES.
Playback of the selected track starts.
Erase track 2
4
C D
3
D
4
Press . or > repeatedly until the
desired track number appears.
5
Press ENTER/YES.
"Complete!" appears. The track selected in
step 4 is erased and playback of the
following track starts. When you erase the
last track, the playback of the previous track
starts.
Note
If you erase all the tracks within a group, the group
itself is also erased.

Erasing all tracks

— All Erase Function
You can erase all the contents recorded on an
MD (the disc title, group titles, all recorded
tracks and their titles) at once.
1
Press FUNCTION repeatedly to switch
the function to MD.
2
Press MENU/NO.
3
Press . or > repeatedly until "All
Erase?" appears, then press ENTER/
YES.
"All Erase??" appears.
4
Press ENTER/YES again.
Note
If you perform the above operation when the Group
Function is on, not only the tracks within the group, but
all the tracks on the MD are erased.
continued
GB
29