Sound Adjustment; Switching The Speaker Output - Sony CMT-SE9 Operating Instructions Manual

Sound Adjustment

Switching the speaker
output
You can select from three different speaker
output modes: the front L/R speakers, the front
L/R speakers and the subwoofer, and the front L/
R speakers, center speaker, surround L/R
speakers and the subwoofer.
When using only the front L/R speakers or the
front L/R speakers and the subwoofer, the multi
channel sound is downmixed and played on two
channels.
Press SPEAKER OUT MODE repeatedly
until the desired speaker output appears.
Speaker output
Front L/R speakers
Front L/R speakers and
subwoofer
Front L/R, center, surround L/R
speakers and subwoofer
Note
The speaker output is fixed to "2CH" and cannot be
switched during recording.
Automatic decoding of the
audio input signal
The auto decoding function automatically
detects the type of audio signal being input
(Dolby Digital, DTS, or standard 2 channel
stereo) and performs the proper decoding if
necessary. This mode presents the sound as it
was recorded/encoded, without adding any
effects (e.g. reverberation).
However, if there are no low frequency signals
(Dolby Digital LFE, etc.), it will generate a low
frequency signal for output to the subwoofer.
1
2
Display
Using only the front speakers
2CH
and subwoofer (2 CHANNEL
2.1CH
STEREO)
This mode outputs the sound from the front L/R
5.1CH
speakers (2CH), or the front L/R speakers and
subwoofer (2.1CH). Standard two channel
(stereo) sources completely bypass the sound
field processing. Multi channel surround
formats are downmixed to two channels.
This allows you to play any source using only
the front L/R speakers and subwoofer.
1
2
Press SPEAKER OUT MODE
repeatedly until "5.1CH" appears.
Press SOUND FIELD + or – repeatedly
until "A.F.D. AUTO" appears.
Press SPEAKER OUT MODE
repeatedly until "2CH" or "2.1CH"
appears.
Press SOUND FIELD + or – repeatedly
until "2CH STEREO" appears.
GB
69