Recording On A Tape Manually; Manual Recording - Sony CMT-SE9 Operating Instructions Manual

Recording on a tape
manually

— Manual Recording

You can record just the portions you like from a
disc, MD or radio program on a tape.
You can also record from connected
components (see "Hooking up optional
components" on page 84).
Use buttons on the MD deck for the operation.
1
Load a recordable tape.
2
Press FUNCTION on the remote
repeatedly to select the desired source
to record.
• DVD: To record from this system's DVD
player.
• MD: To record from this system's MD
deck.
• TUNER: To record from this system's
tuner.
• TV: To record from the connected TV.
• VIDEO (SAT): To record from the
connected optional component.
3
Press REC.
The tape deck stands by for recording.
4
Press DIRECTION repeatedly to select
"g" to record on one side. Select
"h" (or "j") to record on both
sides.
5
Move TAPE lever to nN repeatedly
to select recording side.
If you select both sides recording or front
side recording, move TAPE lever to nN
to light up the N indicator. If you record
on the reverse side, move TAPE lever to
nN again to light up the n indicator.
6
Press X, then start playing the desired
source to record.
Recording starts.
68 GB
Other operations
To Do this
Move TAPE lever to x.
Stop recording
Pause recording Press X.
Note
When you record from a Super Audio CD with multi-
channel sound, only the sound from the front L/R
speakers is recorded.
Tip
If noise is heard while recording from the tuner, move
the respective antenna to reduce the noise.