Moving Recorded Tracks; Move Function - Sony CMT-SE9 Operating Instructions Manual

6
Press ENTER if point A is correct.
"Point B set" appears and playback for
setting the ending point of the portion to be
erased (point B) starts.
If the point A is incorrect,
> repeatedly to find the starting point of
the portion to be erased (point A) while
monitoring the sound, then press ENTER.
You can shift the point by 1/86 second
(1 frame) intervals.*
* You can shift the point by 2-frame intervals (in
Monaural mode and LP2 stereo mode) or by
4-frame intervals (in LP4 stereo mode).
7
Continue playback until the deck
reaches point B, then press ENTER.
"A-B Ers" and "Point B ok?" appear
alternately and the deck repeats a portion of
the few seconds before point A and after
point B successively.
8
Press ENTER if point B is correct.
"Complete!" appears for a few seconds and
the portion between point A and B is erased.
Playback starts from the beginning of the
track.
If the point B is incorrect,
> repeatedly to find the ending point of
the portion to be erased (point B) while
monitoring the sound, then press ENTER.
You can shift the point by 1/86 second
(1 frame) intervals.*
* You can shift the point by 2-frame intervals (in
Monaural mode and LP2 stereo mode) or by
4-frame intervals (in LP4 stereo mode).
Tip
To shift the point by minute or second intervals in steps
6 and 8, press m or M repeatedly to flash minute,
second, or frame indication, then press . or >.
Minute
press . or
press . or
Second
Frame

Moving recorded tracks

— Move Function

You can use this function to change the order of
any track on the disc. When you move tracks,
the tracks are automatically renumbered.
Example: Moving track 3 to position 2
Track number
1 2 3
Original
A B
tracks
2
1
After
A C
MOVE
1
Press FUNCTION repeatedly to switch
the function to MD.
2
Press MENU/NO.
3
Press . or > repeatedly until
"Move?" appears, then press ENTER.
Playback starts.
4
Press . or > repeatedly until the
desired track number to move appears,
then press ENTER.
5
Press . or > repeatedly until the
new track position appears.
Original track number
6
Press ENTER.
"Complete!" appears for a few seconds and
the moved track starts playing.
Note
When you move a track to a track number that is
registered into a group, the moved track is re-registered
into the group. In addition, if you move a track that is
registered into a group to a track number that is not
registered into a group, the group registration of the
moved track is released. However, when the Group
Function is on, you can only move tracks within the
selected group.
4
C D
3 4
B D
New track position
GB
57