IBM System/36 Maintenance Information Manual page 58

360 GeHing ERAP Reports
The error recording analysis procedure (ERAP) gets, formats, and displays or prints error statistical
information. There are four methods of getting ERAP reports:
• The ERAP procedure under SSP lets you get system summary reports and detailed device reports from
the system error log.
• The test request procedure (TESTREQ) under SSP lets you get ERAP reports associated with work
stations and communications devices.
• The Test Request function key of any local or remote work station lets you get ERAP reports associated
with work stations and communications devices.
• A system test (SYSTEST) option lets you get system summary reports and detailed device reports from
the system error log.
To Get ERAP Reports under SSP
1. Enter ERAP.
2. Select the type of ERAP report.
3. Select the option to display or print the ERAP report.
To Get ERAP Reports Using the Test Request Procedure
1. Enter TESTREQ.
2. Select the ERAP option.
3. Select the type of ERAP report.
To Get ERAP Reports Using the Work Station Test Request Key
This procedure assumes that you have a sign-on display but have not signed on a work station.
1. Press the Cmd key and the Test Request function key (backspace key).
2. Select the ERAP option.
3. Select the type of ERAP report.
To Get ERAP Reports When Running the System Test
1.
Press the Attn key.
2. Select option 4 (Set Inquiry Condition for Program) from the Inquiry menu.
3. Select the option that starts ERAP.
4. Select the ERAP reports you want.
S. Use the Cmd7 key to return to SYSTEST.
3-24
5363 Maintenance Information