IBM System/36 Maintenance Information Manual page 33

B1 Board (Feature Machines)
B1-G Connectors
Main Storage Card G
Tape F
E
D
C
' "
B
Feature lOP
A
P4
PS
B1 Board
A36B 1 02-4
Note: The Feature lOP (BI-A) and Main Storage Card (BI-G) must be plugged as shown. Also it is
recommended that the Tape feature card be located in position (BI-F) for cable retention purposes.
The other cards can be plugged in any remaining slots.
Section 2. Overviews and Locations Procedures
2-11