IBM System/36 Maintenance Information Manual page 20

5. Run on-line problem determination.
a. Key in PROBLEM and press the Enter key.
b. Select the Tape option.
c. Follow the prompts.
Procedure 126
1. Run on-line problem determination:
a. Key in PROBLEM and press the Enter key.
b. Select the Local Area Network option.
c. Follow the prompts.
Procedure 132
1. Exchange any FRU indicated by the SRCs that you have not already exchanged.
If the failure is still present, check for the following:
a. Work station (display or printer) problem ("706 Local Work Station Network Analysis Procedure"
on page 7-2). (See the suitable work station maintenance manual.)
b. Bad twinaxial cable: Check both ends for a good connection ("714 Local Work Station Cable
Ohmmeter Test" on page 7-15) and ("710 Local Work Station Cable Signal Quality Check" on
page 7-3).
If the problem is repaired, this procedure is complete.
If not, go to "Procedure 122" on page 1-7.
1-8
5363 Maintenance Information