IBM System/36 Maintenance Information Manual page 139

Safety Labels
Check Step
o
Ensure that the system has all of the safety labels shown below. The label shown is on the base
power supply. The same label appears on the feature power supply if one is present.
>200V
DO
NOT REMOVE COVERS
DO NOT SERVICE
PN 80Xlc+7c+
System Covers
Check Step
R36B136-2
o
Disconnect the power cord from the customer power outlet.
o
Ensure that the system covers are not loose or broken.
o
Ensure that the covers have no sharp edges.
o
Return the system to the customer and inform the local branch office that the safety inspection is
complete.
Appendix B. Safety Inspection Guide
B-3