Video Menu - Sony STR-DH810 Operating Instructions Manual

VIDEO menu

You can make settings for video.
x RESOLUTION
Lets you convert the resolution of analog
video input signals (component video and
video) and output from the HDMI TV OUT
jack.
• AUTO
The resolution is set automatically,
depending on the connected TV.
• 480/576p
The resolution is set to 480p/576p. Video
signals are upconverted and output through
the receiver.
• 720p
The resolution is set to 720p. Video signals
are upconverted and output through the
receiver.
• 1080i
The resolution is set to 1080i. Video signals
are upconverted and output through the
receiver.
• 1080p
The resolution is set to 1080p. Video signals
are upconverted and output through the
receiver.
Note
If you select a resolution that the connected TV does
not support in "RESOLUTION", the images from
the TV will not be output correctly.
x V. ASSIGN
Lets you assign the video input to other input
source. For details, see "Enjoying the sound/
images from other inputs" (page 69).
HDMI menu
You can make various adjustments for HDMI
settings.
x CTRL: HDMI
Lets you turn the Control for HDMI function
on or off. For details, see ""BRAVIA" Sync
Features" (page 56).
x PASS THRU
Lets you output the HDMI signals to the TV
even when the receiver is in standby mode.
• ON
When the receiver is in the standby mode,
the receiver continuously outputs HDMI
signals from the receiver's HDMI TV OUT
jack.
• AUTO
When the TV is turned on while the receiver
is in the standby mode, the receiver outputs
HDMI signals from the receiver's HDMI TV
OUT jack. Sony recommends this setting if
you use a TV that is compatible with
"BRAVIA" Sync. This setting saves power
in the standby mode compared with the
"ON" setting.
• OFF
The receiver does not output HDMI signals
when in the standby mode. Turn on the
receiver to enjoy the connected component's
source on the TV. This setting saves power in
the standby mode compared with the "ON"
setting.
Notes
• This parameter is not available when "CTRL:
HDMI" is set to "CTRL OFF".
• When "AUTO" is selected, it may take a little more
time for the image and sound to be output to the TV
than when "ON" is selected.
• When the receiver is in standby mode, "HDMI"
indicator will lights up if "PASS THRU" is set to
"AUTO" or "ON". However, when "PASS THRU"
is set to "AUTO", this indicator will lights off if no
signals are detected.
continued
83 GB