System Menu; Using The Remote; Programming The Remote - Sony STR-DH810 Operating Instructions Manual

SYSTEM menu

You can customize the settings of the receiver.
x DIMMER
Lets you adjust the brightness of the display in
3 levels.
Tip
You can also use DIMMER on the receiver.
x SLEEP
Lets you set the receiver to turn off
automatically at a specific time. For details,
see "Using the Sleep Timer" (page 45).
• 2:00:00
• 1:30:00
• 1:00:00
• 0:30:00
• OFF
x AUTO STBY
Lets you set the receiver switch to standby
mode automatically when you do not operate
the receiver or when there is no signals input
to the receiver.
• STBY ON
Switches to standby mode after
approximately 30 minutes.
• STBY OFF
Does not switch to standby mode.
Notes
• This function does not work in the following cases.
– TUNER input is selected.
– S-AIR receiver or surround amplifier is used.
• If you use the Auto Standby mode and the Sleep
Timer at the same time, the Sleep Timer has
priority.
x NAME IN
Lets you set the name of inputs. For details,
see "Naming inputs" (page 44).
S-AIR menu
For details on S-AIR, see "S-AIR Operations"
(page 60).

Using the Remote

Programming the remote

You can program the remote to control non-
Sony components by changing the code. Once
the control signals have been memorized, you
can use those components as part of your
system.
Furthermore, you can also program the remote
for Sony components that the remote is unable
to control. Note that the remote can only
control components that accept infrared
wireless control signals.
Note
You cannot change the settings of DMPORT input
buttons.
RM SET
UP
TV
BD DVD
Numeric
TV VIDEO 1
buttons
SA-CD/
DMPORT
CD
HDMI 1 HDMI 2
HDMI 4
1
Press AV ?/1 while pressing
RM SET UP.
The RM SET UP indicator slowly flashes.
2
Press the input button for the
component you want to control.
For example, if you are going to control a
CD player, press SA-CD/CD.
The RM SET UP and SHIFT indicator
light up.
AV ?/1
SAT/
CATV
Input
VIDEO 2
buttons
TUNER
ENTER
HDMI 3
continued
85 GB