Specifications - Sony STR-DH810 Operating Instructions Manual

Reference sections for clearing
the receiver's memory
To clear
All memorized settings
Customized sound fields

Specifications

AUDIO POWER
See
SPECIFICATIONS
page 34
POWER OUTPUT AND TOTAL
page 55
HARMONIC DISTORTION:
(Models of area code U2 only)
With 8 ohm loads, both channels driven, from
20 – 20,000 Hz; rated 95 watts per channel
minimum RMS power, with no more than
0.09% total harmonic distortion from 250
milliwatts to rated output.
Amplifier section
Models of area code CEL, CEK
Stereo Mode Output Power
(8 ohms, 1 kHz, THD 1%)
Surround Mode Output Power
(8 ohms, 1 kHz, THD 10%)
Models of area code U2
Minimum RMS Output Power
(8 ohms, 20 Hz – 20 kHz, THD 0.09%)
Stereo Mode Output Power
(8 ohms, 1 kHz, THD 1%)
Surround Mode Output Power
(8 ohms, 1 kHz, THD 10%)
1)
Measured under the following conditions:
Area code
CEL, CEK
U2
2)
Reference power output for front, center,
surround, surround back and front high speakers.
Depending on the sound field settings and the
source, there may be no sound output.
1)
100 W + 100 W
2)
140 W per channel
1)
100 W + 100 W
110 W + 110 W
2)
150 W per channel
Power requirements
230 V AC, 50 Hz
120 V AC, 60 Hz
continued
101 GB