Sony STR-DH810 Operating Instructions Manual page 81

Multi channel av receiver
Hide thumbs Also See for STR-DH810:
Table of Contents

Advertisement

x DIST. UNIT
Lets you select the unit of measure for setting
distances.
• METER
The distance is displayed in meters.
• FEET
The distance is displayed in feet.
x FRT CROSS
Lets you set the bass crossover frequency of
the front speakers that have been set to
"SMALL" in the SPEAKER menu.
x CNT CROSS
Lets you set the bass crossover frequency of
the center speaker that have been set to
"SMALL" in the SPEAKER menu.
x SUR CROSS
Lets you set the bass crossover frequency of
the surround speakers that have been set to
"SMALL" in the SPEAKER menu.
x FH CROSS
Lets you set the bass crossover frequency of
the front high speakers that have been set to
"SMALL" in the SPEAKER menu.
SURROUND menu
You can select the sound field you want for
your listening pleasure.
x S.F. SELECT
Lets you select the sound field you want. For
details, see "Enjoying Surround Sound" (page
51).
Note
The receiver lets you apply the last selected sound
field to an input whenever it is selected (Sound Field
Link). For example, if you select "HALL" for the
DVD input, then change to a different input and then
return to DVD, "HALL" will automatically be
applied again.
x EFFECT
Lets you adjust the "presence" of the surround
effect for the Cinema Studio EX A/B/C sound
fields.
EQ menu
You can adjust the tonal quality (bass/treble
level) of the front speakers.
x BASS
x TREBLE
Note
This function does not work in the following cases.
– Signals with a sampling frequency of more than
48 kHz are being received.
– Analog Direct is selected.
Tip
You can also adjust the front speaker bass and treble
level with TONE MODE and TONE +/– on the
receiver.
TUNER menu
You can set the FM station receiving mode and
name the preset stations.
x FM MODE
• STEREO
This receiver will decode the signal as stereo
signal when the radio station is broadcast in
stereo.
• MONO
This receiver will decode the signal as mono
signal regardless of the broadcast signal.
x NAME IN
Lets you set the name of preset stations. For
details, see "Naming preset stations" (page
49).
81
GB

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents