Changing The Channel For Better Sound Transmission - Sony STR-DH810 Operating Instructions Manual

Changing the channel
for better sound
transmission
If you use multiple wireless systems which
sharing the 2.4 GHz band, such as wireless
LAN or Bluetooth, the transmission of S-AIR
products or other wireless systems may be
unstable. In this case, the transmission may be
improved by changing the following "RF
CHANGE" setting.
,
V/v/B/b
O
MENU
<
.
1
Press AMP MENU.
2
Press V/v repeatedly to select
"<S-AIR>", then press
3
Press V/v repeatedly to select
"RF CHANGE", then press
or b.
4
Press V/v repeatedly to select
the setting you want, then
press .
• RF AUTO: Normally select this. The
system changes "RF CHANGE" to "RF
ON" or "RF OFF" automatically.
• RF ON: The system transmits sound by
searching the better channel for
transmitting.
• RF OFF: The system transmits sound by
fixing the channel for transmitting.
To exit the menu
Press MENU/HOME or AMP MENU.
66
GB
AMP
MENU
MENU/
HOME
< >
or b.
Notes
• In most cases, you will not need to change this
setting.
• If "RF CHANGE" is set to "RF OFF",
transmission between the S-AIR main unit and
S-AIR sub unit can be performed using one of the
following channels.
– S-AIR ID A: equivalent channel for IEEE
802.11b/g channel 1
– S-AIR ID B: equivalent channel for IEEE
802.11b/g channel 6
– S-AIR ID C: equivalent channel for IEEE
802.11b/g channel 11
• The transmission may be improved by changing
the transmission channel (frequency) of the other
wireless system(s). For details, refer to the
operating instructions of the other wireless
system(s).