Settings For The Video (Video Menu) - Sony STR-DG720 Operating Instructions Manual

Settings for the video
(VIDEO
menu)
You can use the VIDEO menu to make various
adjustments for HDMI and to name inputs.
Select "6-VIDEO" in the amplifier menus. For
details on adjusting the parameters, see
"Navigating through menus" (page 37) and
"Overview of the menus" (page 38).
VIDEO menu parameters
• AUDIO FOR HDMI (Audio for
HDMI)
Lets you set the audio output for HDMI from
the playback component connected to the
receiver via an HDMI connection.
• AMP
The HDMI audio signals from the playback
component is only output to speakers
connected to the receiver. Multi-channel
sound can be played back as it is.
Note
Audio signals are not output from the TV's
speakers when "AUDIO FOR HDMI" is set to
"AMP".
• TV+AMP
The sound is output from TV's speaker and
the speakers connected to the receiver.
Notes
• The sound quality of the playback component
depends on the TV's sound quality, such as the
number of channels, and the sampling
frequency, etc. When the TV has stereo
speakers, the sound output from the receiver is
also stereo as that of the TV, even if you play
back multi-channel source.
• When you connect the receiver to a video
component (projector, etc.), sound may not be
output from the receiver. In this case, select
"AMP".
• CONTROL FOR HDMI (Control
for HDMI)
Lets you turn the Control for HDMI function
on or off. For details, see "Control for HDMI"
(page 69).
• NAME IN (Naming inputs)
Lets you set the name of inputs. For details, see
"Naming inputs" (page 78).