Sale (Credit Or Debit) Transactions - Ingenico Move/5000 Quick Reference Manual

8 – Sale (Credit or Debit) Transactions
The sale transaction is the most common transaction.
1. Tap Sale transaction icon on home screen, or press [Enter] to
enter the main menu, and then tap Sale
2. Enter the clerk ID and password (if enabled) and press [Enter]
3. Enter the invoice # (if enabled) and press [Enter]
4. Key in the transaction amount and press [Enter]
5. Terminal displays "Pass Terminal to Customer," the
cardholder presses [1]-Yes/Oui to confirm the transaction
amount. Press [2]- No/Non to cancel the transaction
6. If tip is enabled, customer can select either [1]-Tip
percentage, [2]-Tip amount, or [3]-No Tip. If tip percentage is
selected, cardholder then can select one of three pre-set tip
percentage options, or select Other to key in a specific tip
percentage and press [Enter] to confirm. If tip amount is
selected, cardholder can enter dollar amount for tip and press
[Enter] to confirm
7. The cardholder presses [1]-Accept to confirm the total
amount, presses [2]-No/Non to change
Terminal displays "$ Amount" "Tap/Insert/Swipe"
8.
"Taper/Inserer/Glisser"
9. The cardholder taps their card/inserts the chip card/swipes
their card
10. If the card is inserted, cardholder follows the EMV prompts
displayed on the terminal screen and then enters PIN
11. If the card is swiped, follow the prompts on screen to enter last
4 digit of the card number and CVV/CVC (if enabled)
12. If credit card is issued outside Canada and your terminal is
enabled with HomeCurrencyPay (HCP) dynamic currency
conversion, the cardholder should follow the HCP prompts
20