To Conduct A Contactless Transaction; Sale (Credit Or Debit) Transactions - Ingenico iCT250 Quick Reference Manual

To Conduct a Contactless Transaction

1. Press the [Enter] key to enter the main menu.
2. Select a transaction type and follow the prompts accordingly.
3. Bring the card firmly up to the active zone above the display (at
about 1 cm). Keep the card close to the display during the
transaction.
4. Your contactless terminal has a row of four status lights that are
visible on the display. When a contactless transaction is started the
first (left hand) status light will be lit steadily; this indicates that the
contactless display is in use but a card is not being read.
5. When a contactless card is presented to the contactless active
zone during a transaction, the second, third and fourth status lights
will be lit in turn. The card read is successful when all four status
lights are lit and the confirmation tone is heard.
6 – Sale (Credit or Debit) Transactions
The sale transaction is the most common transaction for general retail
applications.
NOTE:
If you are presented with a card with a chip on it,
insert the card in the chip reader on the terminal with
the chip facing up and in. Leave the card in the reader
until the transaction is completed.
16