Accepting Payment Cards; To Conduct A Contactless Transaction - Ingenico Move/5000 Quick Reference Manual

The Bluetooth connection status is shown as follows:
7 – Accepting Payment Cards

To Conduct a Contactless Transaction

Tap the transaction icon on the home screen, or press [Enter]
1.
key to enter the main transaction menu and then select
transaction type
2. Follow the prompts displayed on the screen accordingly
3. Bring the card firmly up to the active zone above the display
(hold approx.1 cm above the contactless logo located on paper
trapdoor). Keep the card close to the display during the
transaction
4. Your contactless terminal has a row of four status lights that
are visible on the display. When a contactless transaction is
started the first (left hand) status light will be lit steadily; this
indicates that the contactless display is in use but a card is not
being read
5. When a contactless card is presented to the contactless active
zone during a transaction, the second, third and fourth status
lights will be lit in turn. The card read is successful when all
four status lights are lit and the audible confirmation tone is
heard
Bluetooth present but not activated
Bluetooth connection is in progress
Terminal connected to at least one base
18