Set Up Your Manager/Supervisor Id And Passwords; Clerk Id & Password - Ingenico Move/5000 Quick Reference Manual

There are up to 10 managers and 10 supervisors. The
Manager/Supervisor ID is between one to seven numeric digits.
Each ID must be unique and cannot be duplicated.
The manager, supervisor and clerk password length is seven alpha
and numeric characters. The password can consist of any number
of alpha or numeric characters.
If the manager or supervisor forgets their password, the highter
level user for exmaple admin user must delete the existing
manager/supervisor ID and adding a new one.

Set Up Your Manager/Supervisor ID and Passwords

Any higher-level user can setup the users at lower level. For
example, Administrator can setup both manager and supervisor
users; manager can setup supervisor users.
At home screen, press the administrator [.,#*] key or tap
1.
ADMIN on the home screen for the administrator menu
2. Tap Security
3. Enter the user name and password, press [Enter]
4. Tap Supervisor/Manager
Enter the administrator name and password, press [Enter]
5.
6. Press [1] Add User
7. Press [1] Supervisor, [2] Manager
8. Enter Supervisor or Manager ID
9. Enter Supervisor or Manager Name
Enter Password, re-enter Password
10.
Terminal prompts: Add Another? [1] Yes [2] No
11.
12. Press [Cancel] to return to the home screen
Clerk ID & Password
Clerk ID and password can be setup in Clerk menu within Admin
menu. There are maximum 200 available Clerk IDs and Passwords.
Each Clerk ID has an associated name and password.
12