Network Communication; For A Wi-Fi Set-Up - Ingenico Move/5000 Quick Reference Manual

6 – Network Communication
The Move/5000 terminal can support the following three (3) network
communications: Wi-Fi, Bluetooth, and Cellular 4G wireless. You
can select any of these communication modes to use as your
primary communication method. The following instructions will help
you setup your device:

For a Wi-Fi Set-Up

1. At the home screen, press the administrator [.,#*] key or tap
ADMIN on Home Screen for the administrator menu
Tap Setup Menu
2.
3. Key in the administrator name and password, and then press
[Enter]
4. Press [2]- Communications
5. Press [3] Wi-Fi
Press [2] Advanced Setup
6.
Press [3] Wi-Fi - ON/OFF to enable/disable Wi-Fi mode
7.
8. Terminal displays "Wi-Fi Enabled, Press Enter", and then
press [Enter]
9. Press Cancel to return to Wi-Fi menu
Select [1] - Wi-Fi Easy Conn and then proceed to Step 11, or
10.
[2] - Advanced Setup and proceed to Step 14
This option enables the user to quickly find and connect to a
Wi-Fi network. The device looks for and lists the following
available networks:
• Any new unconnected secure networks (Padlock Icon)
• A previously saved secure network (Padlock Icon)
11. Tap the SSID name of the Wi-Fi network that you want to
connect from list
12. Enter Wi-Fi Password, and then press [Enter]
13. If some special configuration is required to connect a Wi-Fi
network, press [2] - Advanced Setup in step 10 above
Press [1] - [Networks], this option must be used when
14.
manually adding a Wi-Fi network or seeing a list of saved
Wi-Fi networks in addition to scanning for networks
Press [2] - [IP Settings], this option is used if the Wi-Fi IP
15.
setting needs to be set to "Static IP". The user needs to enter
all appropriate IP settings to complete the Wi-Fi Static IP
setup
16. Select the SSID name of the Wi-Fi network that you want to
14