To Set Up Or Change The Clerk Password; Changing The Terminal Language - Ingenico Move/5000 Quick Reference Manual

There cannot be duplicate Clerk IDs. The Clerk ID is between one
to six numeric digits.
Clerk Name is between one to twenty alpha & numeric characters.
The Clerk password is between four and seven alphanumeric
digits. This password does not expire. If the Clerk forgets their
password, the Administrator, Manager or Supervisor can set a new
one.

To set up or change the Clerk Password

1. At the home screen, press the administrator [.,#*] key or tap
ADMIN on Home Screen for the administrator menu
2. Tap Clerk Menu
3. Enter the administrator name and password, and press
[Enter]
4. Press [1] Add ID
5. Enter Clerk ID
Enter Clerk Name
6.
7. Enter Password , re-Enter Password
8. Terminal prompts: Add Another? [1] Yes [2] No
9. Press [Cancel] to return to the home screen
To setup or change the password protection configurations, contact
Global Payments' Customer Care at 1-800-263-2970.
5 – Changing the Terminal Language
1. At the home screen, tap LANGUAGE, bottom right-hand
corner
2. Press [1]-English, press [2]-Francais, and press [Enter]
3. The home screen will be displayed in the alternate language
(English or French)
13