For A 4G Mobile Data Set-Up - Ingenico Move/5000 Quick Reference Manual

connect
17. Enter Wi-Fi Password, and then press [Enter]
18. Press [Cancel] 3 times return to the home screen
NOTE:
To assist, the following icons are used to indicate the status of the
Wi-Fi network.

For a 4G Mobile Data Set-Up

Your terminal supports both 4G and 3G wireless, and will
automatically choose the best available network. If you have
ordered a 4G configuration for your Move/5000, Global Payments
inserts and programs the network SIM Card for your terminal prior
to shipment. There is no setup required by you.
The terminal will automatically connect to the mobile data network
after powering up. It may take a few minutes to connect, depending
on the network signal in the area. The Mobile Data network, if being
used, will display at the top left of the terminal screen. Once
connected, the icon color will change to green. If the icon remains
white, the mobile data network is not connected.
Always make sure terminal is connected with mobile data network
before performing financial transactions.
Bluetooth
Wi-Fi signal range covers an area of approx.
100 feet in diameter in an open area
15