JVC DT-U31 Instructions Manual page 19

System Setting
User pro le saving, rmware update
Item
Global Select a user pro le for all input sources
SFP Select a user pro le for SFP input only
SDI1 Select a user pro le for SDI 1 input only
SDI2 Select a user pro le for SDI 2 input only
SDI3 Select a user pro le for SDI 3 input only
Load Pro le
SDI4 Select a user pro le for SDI 4 input only
*1
4xSDI(SQ) Select a user pro le for Quad split 4x3GSDI input only
4xSDI(2SI) Select a user pro le for 2SI interleave 4x3GSDI input only
HDMI Select a user pro le for HDMI input only
Back Return to previous menu
Exit Exit Main Menu
Save all the current menu settings to User pro le,
Save Pro le
Support rename user pro le when saving.
Key Brightness
Set front key board light brightness
OSD TIME (SEC) Select a time to quit menu if there's no operation
F1
F2
F3
F4
F5
F6
Green Mode Turn down or switch o the LCD backlight to save energy
Idel Duration
Select a time to enter Green mode if there's no operation
Key Lock *2 Select a key lock mode
Firmware Update *3
Enter rmware update
System Reset Reset all the monitor settings
Back Return to previous menu
Exit Main Menu
Exit
*1 Load Pro le
Select "Global" to "User 1-8", to assign the user pro le to all
the input sources;
Select "Global" to "OFF", the user pro les can be assigned to
each input source individually.
*2 Key Lock
Select di erent keys to lock:
Rotary knobs
All
The MENU button can be operated when Key locked.
Press the locked buttons or knobs, the screen will display:
Key Locked
To do
Assign functions to the function
keys F1 - F6 on the front key board
Key buttons
Setting value
User 1-8, OFF
User 1-8
User 1-8
OFF, LOW, HIGH
5-180
Time code, Color Temp, Flip mode,
Freeze Frame, WFM type, WFM Single Line,
UMD, Marker, H/V Delay, Blue Only, Audio bar,
Zebra, Vector, Low Latency Mode, Histogram,
Odd/Even Frame, Lissajous, Focus Assist,
False color
Black Backlight, Gray Backlight
30Sec, 1Hour, 2Hour, 4Hour, OFF
OFF, Lock All,
Lock Rotary Knobs, Lock Key Buttons
NO, YES
NO, YES
*3 Firmware Update
The monitor rmware can be updated by front USB port.
Update steps:
(1) Download latest rmware le (DT-UXX Vxx YYMMDD.zip)
to USB disk, root directory.
(2) Switch on the monitor, and plug USB disk into front USB
port.
(3) Operate MENU - System Setting - Firmware Update, and
the monitor will update automatically.
(4) When updating succeed, switch the monitor o by front
POWER button and switch on again.
UPDATE
Do you want to update now?
Select MENU to start!
MENU: OK
Please copy only 1 rmware for 1 model monitor into USB
root directory.
Caution! DO NOT cut o power during rmware update.
INFO: Quit
19