Table of Contents
Advertisement
Quick Links
DT-V9L3D
MULTI FORMAT LCD MONITOR
INSTRUCTIONS
Table of Contents
Safety Precautions .............................................. 2
IMPORTANT SAFEGUARDS ........................... 2
Installation ............................................................ 4
To adjust the stand height ................................ 4
Daily Operations / Connections ......................... 6
Front panel ....................................................... 6
Rear panel ........................................................ 8
Available signals ............................................... 9
Menu Configuration—MAIN MENU .................. 10
Menu Configuration—SET-UP MENU ............... 14
External Control ................................................. 16
About the external control .............................. 16
Using the MAKE/TRIGGER system ............... 16
Using the RS-232C system ............................ 17
Troubleshooting ................................................. 18
Self-check program ........................................ 19
Maintenance ....................................................... 20
Specifications .................................................... 21
General ........................................................... 21
Input/output terminals ..................................... 21
Dimensions ..................................................... 22
ENGLISH
Advertisement
Table of Contents
Related Manuals for JVC DT-V9L3D
Summary of Contents for JVC DT-V9L3D
- Page 1 DT-V9L3D MULTI FORMAT LCD MONITOR INSTRUCTIONS Table of Contents Safety Precautions ... 2 IMPORTANT SAFEGUARDS ... 2 Installation ... 4 To adjust the stand height ... 4 Daily Operations / Connections ... 6 Front panel ... 6 Rear panel ... 8 Available signals ...
- Page 2 Safety Precautions WARNING: TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS. IMPORTANT SAFEGUARDS Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure your personal safety.
- Page 3 Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation. Attention: This symbol (Business users) If you wish to dispose of this product, please visit our web page http://www.jvc.eu/ to obtain is only valid in information about the take-back of the product. the European Union.
- Page 4 Installation CAUTION • Do not rest your arm on the monitor or lean against the monitor. • Do not touch the LCD panel when installing the monitor. • Be sure to install the monitor securely to prevent the monitor from falling over, which may cause damage to the monitor or injury.
- Page 5 Lower position To prevent an accidental fall Fix the monitor to a wall by using strings. Attachment screws Fixing the monitor Attach the hook (not provided) to the VESA mounting holes on the rear panel (use the two 100 mm pitch holes on the upper side) using M4 x 10 mm screws (not provided).
- Page 6 Daily Operations / Connections 7 Front panel Tally lamp This lamp is controlled by the tally function of the MAKE/TRIGGER terminal. • This lamp can also be used as the format indicator (☞ “FORMAT INDICATOR” in “FUNCTION SETTING” on page 14). 1 Screw holes for attaching protective filter 5 MUTING button (provided)
- Page 7 Menu Operations Audio Channel Selection Select audio channels emitted from the speaker Display the menu. and the AUDIO (MONITOR OUT) OUT1/OUT2 To display the MAIN MENU terminals, when EMBEDDED AUDIO signals \ Press MENU button. come in to the E. AUDIO HD/SD SDI terminal (IN1 To display the SET-UP MENU or IN2) and SDI input (1 or 2) is selected.
- Page 8 Daily Operations / Connections 7 Rear panel 1 POWER switch Turns AC power on or off. • You need to press 2 AC IN terminal AC power input connector. Connect the provided AC power cord to an AC outlet. • Attach the provided power cord holder to prevent 3 DC switch Turns the DC 12 V power on or off.
- Page 9 7 Available signals The following signals are available for this monitor. Video signals Signal format shown VIDEO/COMPONENT Signal name in the status display (☞ page 7) (Composite) √ NTSC* NTSC √ B/W50 √ B/W60* NTSC √ 480/60i 480/60i — 480/59.94i* 480/59.94i —...
- Page 10 Menu Configuration—MAIN MENU For the operation procedure, see page 7. Operation guide Shows the buttons for each operation. • The menu automatically disappears in about 30 seconds after the previous operation. • Some items may not appear on the menu depending on the input or the input signal. •...
- Page 11 Operation guide Shows the buttons for each operation. • The menu automatically disappears in about 30 seconds after the previous operation. • Some items may not appear on the menu depending on the input or the input signal. • The items controlled by the MAKE system do not appear on the menu. NOTE Setting of “AREA MARKER”, “SAFETY MARKER”, “R-AREA MARKER”, “R-SAFETY MARKER”...
- Page 12 Menu Configuration—MAIN MENU Operation guide Shows the buttons for each operation. • The menu automatically disappears in about 30 seconds after the previous operation. • Some items may not appear on the menu depending on the input or the input signal. •...
- Page 13 Operation guide Shows the buttons for each operation. • The menu automatically disappears in about 30 seconds after the previous operation. • Some items may not appear on the menu depending on the input or the input signal. • The items controlled by the MAKE system do not appear on the menu. NOTE Example of the wave form monitor Ex.: When “MARKING”...
- Page 14 Menu Configuration—SET-UP MENU For the operation procedure, see page 7. Operation guide Shows the buttons for each operation. • The menu automatically disappears in about 30 seconds after the previous operation. • Some items may not appear on the menu depending on the input or the input signal.
- Page 15 Operation guide Shows the buttons for each operation. • The menu automatically disappears in about 30 seconds after the previous operation. • Some items may not appear on the menu depending on the input or the input signal. • The items controlled by the MAKE system do not appear on the menu. NOTE Setting of “CHARACTER SET.”...
- Page 16 External Control 7 About the external control This monitor has two external control terminals. • MAKE/TRIGGER terminal (RJ-45): The following external control systems are available. (1) MAKE (make contact) system: Controls the monitor by short-circuiting the corresponding pin terminal to the GND pin terminal, or disconnecting (opening) it (☞...
- Page 17 7 Using the RS-232C system You can control the monitor from a personal computer etc. via the RS-232C terminal. • Consult your dealer for the details of the external control specification. <Communication specifications> Baud Rate: 4800 bps Data Bits: 8 bits Parity: No parity Stop Bits: 1 bit Flow Control: No control...
- Page 18 Troubleshooting Solutions to common problems related to the monitor are described here. If none of the solutions presented here solve the problem, unplug the monitor and consult an authorized dealer or service center. Symptom Probable cause and corrective action • Press the button.
- Page 19 7 Self-check program This monitor has a self-check function, which allows it to detect malfunctions and alert you. This makes troubleshooting easier. Whenever a problem occurs, one or some of the self-check lamps will flash. If this happens, follow the steps below and contact your dealer to resolve the problem. When the screen goes blank and one or some of the self-check lamps on the front control panel start flashing...
- Page 20 Maintenance Unplug this product from the wall outlet before cleaning. Screen To avoid irreparable change in appearance of the screen such as uneven color, discoloration, scratches, be careful about the following: • Do not paste or stick anything using any glues or adhesive tapes. •...
-
Page 21: Multi Format Lcd Monitor
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Notice on transportation This monitor is precision equipment and needs dedicated packing material for transportation. Never use any packing material supplied from sources other than JVC or JVC-authorized dealers. 7 Input/output terminals VBS/Y... - Page 22 Specifications (cont.) 7 Dimensions Unit: mm <Front view> 222.4 * at the higher position ** at the lower position ˝ ˝ tapped hole (3/8 tapped hole (1/4 <Side view> • When the stand is attached to the • When the stand is attached to the higher position.
-
Page 23: Table Of Contents
DT-V9L3DY MULTI FORMAT LCD MONITOR CAUTION RISK OF ELECTRICAL SHOCK DO NOT OPEN CAUTION: To reduce the risk of electric shock. Do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. Table of Contents Safety Precautions ... -
Page 24: Safety Precautions
Safety Precautions WARNING: TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS. IMPORTANT SAFEGUARDS Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure your personal safety. -
Page 25: Important Safety Instructions
REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE. FCC NOTICE CAUTION: Changes or modifications not approved by JVC could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. -
Page 26: Installation
Installation CAUTION • Do not rest your arm on the monitor or lean against the monitor. • Do not touch the LCD panel when installing the monitor. • Be sure to install the monitor securely to prevent the monitor from falling over, which may cause damage to the monitor or injury. - Page 27 Lower position To prevent an accidental fall Fix the monitor to a wall by using strings. Attachment screws Fixing the monitor Attach the hook (not provided) to the VESA mounting holes on the rear panel (use the two 100 mm pitch holes on the upper side) using M4 x 10 mm screws (not provided).
-
Page 28: Daily Operations / Connections
Daily Operations / Connections 7 Front panel Tally lamp This lamp is controlled by the tally function of the MAKE/TRIGGER terminal. • This lamp can also be used as the format indicator (☞ “FORMAT INDICATOR” in “FUNCTION SETTING” on page 14). 1 Screw holes for attaching protective filter 5 MUTING button (provided) - Page 29 Menu Operations Audio Channel Selection Select audio channels emitted from the speaker Display the menu. and the AUDIO (MONITOR OUT) OUT1/OUT2 To display the MAIN MENU terminals, when EMBEDDED AUDIO signals \ Press MENU button. come in to the E. AUDIO HD/SD SDI terminal (IN1 To display the SET-UP MENU or IN2) and SDI input (1 or 2) is selected.
-
Page 30: Rear Panel
Daily Operations / Connections 7 Rear panel 1 POWER switch Turns AC power on or off. • You need to press 2 AC IN terminal AC power input connector. Connect the provided AC power cord to an AC outlet. • Attach the provided power cord holder to prevent 3 DC switch Turns the DC 12 V power on or off. -
Page 31: Available Signals
7 Available signals The following signals are available for this monitor. Video signals Signal format shown VIDEO/COMPONENT Signal name in the status display (☞ page 7) (Composite) NTSC* NTSC √ √ B/W50 √ B/W60* NTSC √ 480/60i 480/60i — 480/59.94i* 480/59.94i —... -
Page 32: Menu Configuration-Main Menu
Menu Configuration—MAIN MENU For the operation procedure, see page 7. Operation guide Shows the buttons for each operation. • The menu automatically disappears in about 30 seconds after the previous operation. • Some items may not appear on the menu depending on the input or the input signal. •... - Page 33 Operation guide Shows the buttons for each operation. • The menu automatically disappears in about 30 seconds after the previous operation. • Some items may not appear on the menu depending on the input or the input signal. • The items controlled by the MAKE system do not appear on the menu. NOTE Setting of “AREA MARKER”, “SAFETY MARKER”, “R-AREA MARKER”, “R-SAFETY MARKER”...
- Page 34 Menu Configuration—MAIN MENU Operation guide Shows the buttons for each operation. • The menu automatically disappears in about 30 seconds after the previous operation. • Some items may not appear on the menu depending on the input or the input signal. •...
- Page 35 Operation guide Shows the buttons for each operation. • The menu automatically disappears in about 30 seconds after the previous operation. • Some items may not appear on the menu depending on the input or the input signal. • The items controlled by the MAKE system do not appear on the menu. NOTE Example of the wave form monitor Ex.: When “MARKING”...
-
Page 36: Menu Configuration-Set-Up Menu
Menu Configuration—SET-UP MENU For the operation procedure, see page 7. Operation guide Shows the buttons for each operation. • The menu automatically disappears in about 30 seconds after the previous operation. • Some items may not appear on the menu depending on the input or the input signal. - Page 37 Operation guide Shows the buttons for each operation. • The menu automatically disappears in about 30 seconds after the previous operation. • Some items may not appear on the menu depending on the input or the input signal. • The items controlled by the MAKE system do not appear on the menu. NOTE Setting of “CHARACTER SET.”...
-
Page 38: External Control
External Control 7 About the external control This monitor has two external control terminals. • MAKE/TRIGGER terminal (RJ-45): The following external control systems are available. (1) MAKE (make contact) system: Controls the monitor by short-circuiting the corresponding pin terminal to the GND pin terminal, or disconnecting (opening) it (☞... -
Page 39: Using The Rs-232C System
Operation of the external control Set “TYPE SEL.” of “REMOTE SETTING” to “MAKE” or “TRIGGER” in the SET-UP MENU. Short-circuit the 7th pin terminal (ENABLE) to the 8th pin terminal (GND) so that the monitor can be controlled by the external control. When the “MAKE”... -
Page 40: Troubleshooting
Troubleshooting Solutions to common problems related to the monitor are described here. If none of the solutions presented here solve the problem, unplug the monitor and consult an authorized dealer or service center. Symptom Probable cause and corrective action • Press the button. -
Page 41: Self-Check Program
7 Self-check program This monitor has a self-check function, which allows it to detect malfunctions and alert you. This makes troubleshooting easier. Whenever a problem occurs, one or some of the self-check lamps will flash. If this happens, follow the steps below and contact your dealer to resolve the problem. When the screen goes blank and one or some of the self-check lamps on the front control panel start flashing... -
Page 42: Maintenance
Maintenance Unplug this product from the wall outlet before cleaning. Screen To avoid irreparable change in appearance of the screen such as uneven color, discoloration, scratches, be careful about the following: • Do not paste or stick anything using any glues or adhesive tapes. •... -
Page 43: Specifications
This monitor is precision equipment and needs dedicated packing material for transportation. Never use any packing material supplied from sources other than JVC or JVC-authorized dealers. • For easy understanding, pictures and illustrations are shown by being emphasized, omitted or composed, and may be slightly different from actual products. -
Page 44: Dimensions
Specifications (cont.) 7 Dimensions Unit: mm (inch) <Front view> 27.5 (1 1/8) 222.4 (8 7/8) 186 (7 3/8) * at the higher position ** at the lower position ˝ ˝ tapped hole (3/8 tapped hole (1/4 <Side view> • When the stand is attached to the •... - Page 46 DT-V9L3DY MULTI FORMAT LCD MONITOR © 2009 Victor Company of Japan, Limited 0809TKH-MW-MT...